Overview
Cut Protection Level
ANSI Rated Cut Level
Certifications
Cut Protection Level
This is the general level of protection against cuts.
-
Minimum
Basic protection suitable for competitive play
-
Standard
Balanced protection for intense game play. Protects against more severe cuts.
-
Maximum
Highest level of cut resistance for elite gameplay, designed for the biggest and fastest players.
ANSI Rated Cut Level
Measures the actual cut resistance of materials based on the ANSI/ISEA 105 standard.
-
N/A
No specific cut-resistance rating provided by the manufacturer.
-
A1
Minimal protection; withstands light cuts (200-499 grams of force).
-
A2
Lower-level protection; resists slightly heavier cuts (500-999 grams of force).
-
A3
Low-level protection; suitable for competitive play (1,000-1,499 grams of force).
-
A4
Standard protection; defends against significant cuts (1,500-2,199 grams of force).
-
A5
Elevated protection for intense play (2,200-2,999 grams of force).
-
A6
Extra protection for faster, higher-impact play (3,000-3,999 grams of force).
-
A7
Ultra-high protection (4,000-4,999 grams of force).
-
A8
Premium protection for all levels of play and ages (5,000-5,999 grams of force).
-
A9
Top-tier cut resistance for ultimate protection (6,000+ grams of force).
Certifications
Indicates compliance with safety standards and regulations for hockey gear.
-
USA Hockey
Approved for play under USA Hockey regulations. Ensures gear meets safety standards for organized play in the United States.
-
BNQ
Certified by the Bureau de Normalisation du Quebec for cut-resistant hockey gear. Required for players in Canadian Minor Hockey leagues to ensure on-ice safety.
-
CE
Meets European safety standards for protective equipment. Designed for compliance with regulations across European leagues and recreational play.
The CCM Tacks Cut Resistant Neck-Wrist Guard L/S Shirt provides players with certified cut-resistant protection in a lightweight, breathable base layer designed for today's game. Integrated neck and wrist guards are engineered to help reduce the risk of lacerations from accidental skate blade contact while maintaining the comfort, mobility, and low-profile fit players expect beneath their equipment.
Protection levels are tailored to each age group and level of play. Senior models feature an ANSI Level 6 cut-resistant neck guard and wrists for elite-level protection, while Junior models utilize an A6 cut-resistant neck guard paired with A3 cut-resistant wrist cuffs. Every model meets BNQ, HECC, CE, and UKCA certification standards, providing players with game-ready protection that satisfies league requirements.
Comfort and performance are equally important, which is why CCM included AER-TEC ventilation and a fully ventilated mesh back panel to maximize airflow and help regulate body temperature throughout the game. Lightweight performance fabric moves naturally with the body, while Polygiene® treatment helps reduce odor-causing bacteria to keep the shirt feeling fresher between uses. CCM also redesigned the neck opening for improved comfort and incorporated a hook-and-loop closure that's designed to minimize hair snagging when putting the shirt on or taking it off.
| OVERVIEW | |
|---|---|
| Model Number | TTK |
| Certified | BNQ, CE, HECC, UKCA |
Specifications
| KEY TECHNOLOGIES | |
|---|---|
| Cut-Resistant Neck Guard and Wrist Protection Strategic cut protection to the neck and wrist areas significantly reduces the risk of direct laceration injuries. Does NOT protect against impacts. |
|
| Polygiene Technology Polygiene is a natural product that consists of the main ingredient in sand (Silica). Odor molecules are efficiently captured and permanently eliminated, thus keeping your product fresh, reducing the need to wash, and therefore making it last longer. |
|
| AER-TEC Ventilation Built with strategic mesh ventilation and a fabric that delivers premium moisture-wicking properties, players will experience elite-level breathability and comfort underneath their gear. |
| CONSTRUCTION | |
|---|---|
| Material | Body: 86% Polyester / 14% Spandex Mesh: 93% Polyester / 7% Spandex A6 Neck Anti-Cut: 55% UHMWPE / 20% Polyester / 25% Spandex A6 Cuff Anti-Cut: 60% UHMWPE / 30% Polyester / 10% Spandex A3 Cuff Anti-Cut: 60% UHMWPE / 30% Polyester / 10% Spandex |
| Design | BNQ & CE Certified Neck Guard ANSI Neck & Wrist Cut Protection Comfortable and Anti-Snag Neck Adjustment Improved Raglan Style Fit Moisture Wicking Fabric Polygiene Technology Flatlock Seams Aer-Tec Ventilation Silicone Grip on the Forearm |
| Cut Protection |
Senior: ANSI A6 Junior: ANSI A6 (Neck), A3 (Wrists) |
| Graphic | Embroidered CCM Neck Logo |
| Fit | Fitted Arms and Chest, Relaxed Torso |
Sizing Chart
| GENERAL SHIRT SIZING GUIDELINES | |
|---|---|
| Measure the circumference of your chest roughly 1" below the armpit, and the circumference of your neck using a soft measuring tape, string, or shoelace. Correspond your chest and neck measurements to a shirt size using the table below. |
| Junior - CCM NECK GUARD SHIRT SIZING CHART | ||
|---|---|---|
| Shirt Size | Chest | Neck |
| Junior SM | 26" - 27" | 10.0" - 14.0" |
| Junior MD | 27" - 29" | 10.0" - 14.0" |
| Junior LG | 29" - 31" | 10.0" - 14.0" |
| Junior XL | 31" - 34" | 10.0" - 14.0" |
| SENIOR - CCM NECK GUARD SHIRT SIZING CHART | ||
|---|---|---|
| Shirt Size | Chest | Neck |
| Senior SM | 36" - 38" | 16.5" - 19" |
| Senior MD | 39" - 41" | 16.5" - 19" |
| Senior LG | 42" - 44" | 16.5" - 19" |
| Senior XL | 45" - 48" | 16.5" - 19" |
| Senior XXL | 49" - 52" | 16.5" - 19" |
| HELPFUL ARTICLES | |
|---|---|
| What is BNQ Certification for Hockey Neck Guards? | |
| How to Size a Hockey Neck Guard | |
| How to Select a Hockey Neck Guard | |
| IW Hockey Learning Center |
