Overview
Powerslide Phuzion Radon Enzo 80 Men's Inline Skates - Black and White. Phuzion skates focus on comfort and stability, with the Radon Enzo being the best for recreational and returning skaters. Four 80mm wheels are quick to get up and down from speed, agile, and easy to skate. Sizes 9.0 (EU42) and larger have frames that allow for 90mm wheels, making them work nicely for cross-training as well. Removable trinity mount frames allow for change as skills and desires evolve (compatible with any trinity mount frame). Trinity X allows for adjustment side to side and front to back. Light, rigid glass-fiber-reinforced shells provide support and responsiveness. TPU welded reinforcements on the uppers ensure a snug and supportive fit.
Trinity mounting is a 3-point system that adds stability and power by lowering the skate height via a winged mount under the ball of the foot. Integrated liners (not removable) are breathable, and comfortable right out of the box. Featured are strong and responsive Elite Aluminum Frames, Height-Adjustable Brake (HABS), Powerslide 80mm 85A, and Wicked ABEC7 bearings.
| Model Year | 2021-2022 |
|---|---|
| Skate Type | Recreational |
| Skill Level | Beginner and Intermediate |
| Weight | 1320g (US 8.0 EU 41) |
Specifications
| KEY TECHNOLOGIES | |
|---|---|
| Trinity X Mounting The combination of the 'along' mounting block of the boot with the 'across' mounting slot of the frame. This allows for frame adjustment both laterally (7mm) and front to back (8mm) to individual preference and/or correct ankle roll (pronation/supination). Trinity frames mount at three points with two off-set winged mounts under the ball of the foot that create a channel for the wheels to lower the skate, adding stability and power at push-off. |
|
| HABS Height Adjustable Brake System An easy and secure brake that allows for the brake pad to adjust up and down to prolong the life of the rubber. A rear axle that is threaded at both ends allows for installation and removal of the brake with four outer screws that eliminate having to remove the axle or wheel. |
|
| 3D Casted Frames Perfectly shaped around the wheels to optimize the space. 3D construction enhances stiffness and power transfer to offer characteristics similar to those found in CNC machined frames. |
| BOOTS | Phuzion Enzo |
|---|---|
| Construction | Soft Boot |
| Cuff | Medium-High (Glass-Fiber) |
| Liners | Fixed - Not Removable |
| Heat Moldable | No |
| Closures | Classic Cuff Buckle (908314) 45 Degree Velcro Power Strap Standard Lacing (Waxed) |
| Mounting | Trinity X |
| FRAMES | Elite |
|---|---|
| Material | Casted Aluminum |
| Mounting | Trinity |
| Length | 9.6” 243mm Axle to Axle (Sizes 5.0 -8.0) 10.8" 275mm Axle to Axle (Sizes 9.0 - 12.5) |
| Removable | Yes |
| Adjustable | Yes |
| Stock Wheel Setup | 4x80mm |
| Max Wheel Size | 80mm (Sizes 5.0 - 8.0) 90mm (Sizes 9.0 - 12.5) |
| Axles | One-Piece 8mm Steel #520020 |
| COMPONENTS | |
|---|---|
| Wheels | Infinity 80mm 83A |
| Bearings | Wicked ABEC7 |
| Brake | Yes HABS Height Adjustable Brake S/M 907031 |
| Axle for Brake Removal | Included and Installed Rear Axle (940427) Threaded at Both Ends Can Remove Brake Without Removing Axle |
| Skate Tool | Included |
| MANUFACTURER and WARRANTY INFORMATION | |
|---|---|
| Model Number | 940685 |
| Time | 2 Years |
| Contact | Inline Warehouse |
| Country of Origin | China |
Videos
Sizing Chart
| GENERAL SKATE SIZING GUIDELINES | |
|---|---|
| Measure both feet with socks similar to those in which you intend to skate. Then use the measurement of the longest point and reference the model-specific size chart to determine size. How to Measure Your Feet for Skates. | |
| Proper fit has the toes not being cramped against the front. Toes may slightly brush the front as heels will settle back when in the skating position. Try on skates indoors while in a seated position. Lace and buckle both skates, tap your heels to the floor, and then stand and bend your knees to simulate the skating position. How to Try on Inline Skates for Fit. | |
| FIT GUIDELINES: Use foot measurement for the most precise fit. Add .5cm to the measurement for extra room at the toe or if wider feet. Average width with little to no break-in time needed. |
| Enzo Size | CM | EU |
|---|---|---|
| 5.0 | 22.9 | 36 |
| 5.5 | 23.6 | 37 |
| 6.0 | 24.2 | 38 |
| 7.0 | 24.8 | 39 |
| 7.5 | 25.5 | 40 |
| 8.0 | 26.1 | 41 |
| 9.0 | 26.8 | 42 |
| 10.0 | 27.5 | 43 |
| 10.5 | 28.2 | 44 |
| 11.0 | 28.9 | 45 |
| 12.0 | 29.6 | 46 |
| 12.5 | 30.3 | 47 |
Other Items to Consider
Customer Reviews
Love these skatesFlexible but also supportive, and super slick looking too!
Best inlines I've ever ownedI haven't skated in years, but I was once quite proficient on inlines. It's been a struggle to find inlines in my size as I begin getting back into skating.
My shoe size is a US Men's 12.5E (12.5 wide; though I sometimes need to wear a 13E, depending on the shoe manufacturers' sizing differences or non-availability of half-sizes) and I can not express how frustratingly limited my skate options are in both inline and quad categories. No fun colors are available AT ALL, and many models are completely unavailable (looking at you PS Next.)
Fortunately, this model in an EU 47 (sold here as 12.5 US Men's) is a perfect fit for my feet (after some lace adjustments.) I chose powerslide as a brand for a few reasons; adjustability and customization of the wheel frame were big bonuses but I primarily liked that reviewers were saying many models fit wide feet well.
Well, I'm not disappointed. I was looking at an even higher price point than these, but I needed to go two tiers up before I found models in my size. Suffice to say, I am very happy with the cost/quality ratio on this model.
The shell is strong, stiff, and comfy; providing support without locking my ankles up. The integrated liner is breathable and comfortable and is breaking in easily with minor practice, becoming more comfortable by the day. The straps are strong, durable, and feel like they'll last many years. The wheels and bearings are high-quality out-of-box and, while I'll probably upgrade the bearings when it's time to replace the wheels, I'll be more than happy on these as I practice and re-learn 'til then. I fully expect to rotate the wheels a few times before I replace them, so they should last me a while.
I also like how easy the brake is to remove. I don't need it but my fiance will, and since I plan to get her a pair of PS Nexts (they make them in her size), which are compatible with this brake but don't include it, that I have a brake on-hand for her to use.
My only complaint here is that I would like a more mid-tier/slightly higher-end model with the MyFit Liners, like the Next, in my size. I would probably not have chosen these if I weren't so limited in my options; but now that I have them, I love them and fully expect them to support my skating for the next 5 years at least.
