Lighter than all other OEM and aftermarket runners with a Multi-Fit design that fits two Major OEM holders!
The Byonic Multi-Fit Pro Polished Steel Runners were formed with an incredibly accurate laser cut profile that has enabled Byonic steel to be up to 30% lighter than all other OEM and aftermarket skate blades. This laser cut process was used on the bottom of the blades to form a precise dual radius of 9' and 10', which gives skaters unparalleled stability, balance, and control right out of the box.
The upper profile is where Byonic was able to laser cut the weight savings and simultaneously create a patented design in which these blades can fit in both the CCM XS and Bauer Tuuk LS Edge holders. With this all-new multi-fit design, players or teams can now seamlessly use or swap out a Byonic runner with two brands of skates!
Each Byonic runner is made with certified high-strength stainless steel that provides maximum edge life, impact resistance, and increased power transfer. This model has a highly polished surface that increases glide which in turn helps players conserve energy shift after shift.
IW can have your skate blades delivered profiled, sharpened and game-ready! With custom blade profile options including Zuperior, Quad and Ellipse, you can immediately improve your speed, stability and agility compared to stock flat profiles. We also offer a wide range of sharpening options and when it is time for a fresh profile or edge tune-up, use our Express Mail-In Skate Blade Profiling and Sharpening service. Select your blade profile and sharpening hollow when you add a blade to your cart. Learn even more here.
| OVERVIEW | |
|---|---|
| Model Number | MFPROPOLISHED |
| Skate Compatibility | CCM Player Skates with the XS Holder (2019+) Bauer Player Skates with Bauer Tuuk LS Edge Holder (2013+) |
| Holder Compatibility | CCM SpeedBlade XS Holder / Bauer Tuuk LS Edge Not Compatible with True, Graf, or Bauer PowerFly Holders |
| Skate Size Compatibility | 4 - 10.5 |
| Includes | Complete set of runners (left and right) |
| Installation Instructions | Ensure your holder's quick-release mechanism is fully compressed/retracted to install Byonic Multi-Fit skate blades properly. |
Specifications
| KEY TECHNOLOGIES | |
|---|---|
| Dual Profile A 9' radius on the front improves acceleration and turning while the 10' radius on the rear portion of the blade increases stability and balance through each stride and battles along the board. Together, this profile combination maximizes blade contact with the ice in different skating positions. | |
| 21mm Blade Height Taller than standard OEM runners, this added height provides tighter turns, harder stops, and extends the sharpening lifespan over standard steel runners. | |
| XLITE Upper Profile This patented design from Byonic is cut with laser precision that allows the runner to fit the two biggest quick-release OEM Holders on the market; CCM XS and Bauer Tuuk LS Edge. This steel is also up to 30% lighter than leading OEM and aftermarket skate blades. |
| CONSTRUCTION | |
|---|---|
| Steel Grade | Premium-Grade |
| Blade Finish | Polished |
| Blade Height | 21mm (Size U9 Runner) |
| Blade Profile | Dual Blade Profile (9'-10') |
| Product Note | All blades are independently measured at IW Hockey with a 5% variance. |
Sizing Chart
| HOW TO FIND YOUR SKATE BLADE SIZE | |
|---|---|
| Take your current hockey skates and identify the three-digit number, which can be found on either the heel side of your blade holder or on the blades themselves. Locate your three-digit number in either the Bauer Edge or CCM XS Holder charts below to find your Byonic Runner size. If for any reason you cannot locate the number, see our How to Size a Hockey Skate Blade and Holder article for a more in-depth approach to skate blade sizing and skate blade compatibility. |
| BAUER EDGE HOLDER - BYONIC RUNNER SIZING CHART | |||
|---|---|---|---|
| Runner Size | Skate Size (D-Width, Fit 1&2) |
Skate Size (EE-Width, Fit 3) |
Holder Size |
| U4 | 4.0 - 4.5 | 4.0 - 4.5 | 238mm/Jr 4 |
| U5 | 5.0 - 5.5 | 5.0 | 246mm/Jr 5 |
| U6 | 6.0 - 6.5 | 5.5 - 6.0 | 254mm/Sr 6 |
| U7 | 7.0 - 7.5 | 6.5 - 7.0 | 263mm/Sr 7 |
| U8 | 8.0 - 8.5 | 7.5 - 8.0 | 272mm/Sr 8 |
| U9 | 9.0 - 9.5 | 8.5 - 9.0 | 280mm/Sr 9 |
| U10 | 10.0- 10.5 | 9.5 - 10.0 | 288mm/Sr 10 |
| Note: Not Compatible with Bauer PowerFly Holder. Installation Instructions: Ensure your holder's quick-release mechanism is fully compressed/retracted to install Byonic Multi-Fit skate blades properly. |
|||
| COMPATIBLE BAUER SKATES (2013 - PRESENT) | ||
|---|---|---|
| Year | Family | Model |
| 2023 | Vapor | X4, X3 |
| 2022 | Supreme | Mach, M5 Pro, M4, M3 |
| 2021 | Vapor | HyperLite, 3X Pro, 3X, X3.7 |
| 2020 | Supreme | Ultrasonic, 3S Pro, 3S, S37, S35 |
| 2019 | Vapor | 2X Pro, 2X, X2.9, X2.7, X2.5 |
| 2018 | Supreme | 2S Pro, 2S, S29, S27, S25 |
| 2018 | Nexus | 2N, N2900, N2700 |
| 2017 | Vapor | 1X, X900, X800, X700, X600, X500 |
| 2016 | Nexus | 1N, X9000, N8000, N7000 |
| 2016 | Supreme | 1S, S190, S180, S170, S160 |
| 2015 | Vapor | 1X, X900, X800, X700, X600, X500 |
| 2014 | Nexus | 8000, 7000, 6000, 5000 |
| 2014 | Supreme | MX3, 190, 180, 170, 160 |
| 2013 | Vapor | APX2, X100, X90, X80, X70, X60 |
| CCM XS HOLDER - BYONIC RUNNER SIZING CHART | ||
|---|---|---|
| Runner Size | Skate Size (D&EE-Width, Tapered, Regular, Wide) |
Holder Size |
| M4 | 4.0 - 4.5 | 238mm |
| M5 | 5.0 - 5.5 | 247mm |
| M6 | 6.0 - 6.5 | 255mm |
| M7 | 7.0 - 7.5 | 263mm |
| M8 | 8.0 - 8.5 | 271mm |
| M9 | 9.0 - 9.5 | 280mm |
| M10 | 10.0 - 10.5 | 287mm |
| Installation Instructions: Ensure your holder's quick-release mechanism is fully compressed/retracted to install Byonic Multi-Fit skate blades properly. | ||
| COMPATIBLE CCM SKATES (2019 - PRESENT) | ||
|---|---|---|
| Year | Family | Model |
| 2023 | JetSpeed | FT6 Pro, FT6, FT680, FT670 |
| 2022 | Tacks | AS-V Pro, AS-V, AS-580, AS-570 |
| 2021 | JetSpeed | FT4 Pro, FT4, FT485, FT475 |
| 2021 | RibCor | 100K Pro, 90K, 88K, 86K |
| 2020 | Super Tacks | AS3 Pro, AS3, 9380, 9370 |
| 2019 | JetSpeed | FT2, FT490, FT480, FT470, FT460 |
| 2019 | RibCor | 80K, 78K, 76K |
| HELPFUL ARTICLES | |
|---|---|
| How to Size a Hockey Skate Blade and Holder | |
| How to Select the Correct Skate Sharpening and Profile | |
| ProSharp Profiling and Sharpening Servies |
